Posts Tagged ‘Comus’

« Older Entries

Mount Airy Heating Installation Tip: Why AFUE Ratings Matter

Monday, January 23rd, 2012

When you are in the market for a new furnace for your Mount Airy home, there are several reasons you should pay attention to the annual fuel utilization efficiency (AFUE) rating. All newer model furnaces get an AFUE percentage, which measures how much fuel a particular model converts into heat. Furnaces with higher AFUE ratings are more efficient, but the size and type of furnace will also factor into how much you’ll save on energy costs.

Understanding the AFUE Ratio

The minimum AFUE rating for new furnaces is 78%. This means that seventy-eight percent of the fuel is turned into heat, and the remaining percentage is lost either through poor insulation, air leaks, or the ventilation system in the home. Because there’s no heat loss through a chimney flue, some all-electric furnaces can have an AFUE rating as high as 98%. However, if the cost of electricity used to meet your normal heating needs is higher than the efficiency savings, you may want to consider other options. Talk to a qualified HVAC contractor for advice about the most cost-efficient heater for your home.

Furnace Efficiency Features

Furnaces manufactured 15-20 years ago have significantly lower AFUE ratings (between 55%-70% for most older models) because they are typically single-stage, or single-speed systems. Single-stage furnaces are less efficient because they are designed to cycle on at full capacity and shut off when the desired temperature is met.  Newer, two-speed models have a second setting that runs consistently at a lower speed, which saves energy by burning less fuel. Multispeed furnaces that have variable-speed blowers are the most efficient because they operate at various levels and automatically adjust to the thermostat to maintain a constant temperature.

If you look at the AFUE ratings for multispeed and variable-speed furnaces, the ratios should be above 80%. Keep in mind that this only determines the efficiency levels for the furnace itself. You’ll need to factor in whether or not your home has proper insulation and other upgrades, such as double-paned windows and doors.

Call Tuckers Air Conditioning & Heating to speak with one of our qualified HVAC technicians about a furnace upgrade for your Mount Airy home.

Tags: , , , ,
Posted in Services | Comments Off

Comus Heating Contractor Pointers: Basic Heating Safety

Monday, January 9th, 2012

While you should schedule a yearly maintenance visit with a qualified HVAC technician to check for any safety concerns, you can also reduce potential safety hazards in the heating system of your Comus home. Whether you have a furnace, heat pump, or boiler, you can substantially decrease the chances of dangerous situations with a few minor routine tasks.

If you have any questions about how to better maintain your heating system, give Tuckers Air Conditioning & Heating a call to speak with one of our expert HVAC technicians. Here are a few guidelines to get you started.

Ventilation in Forced-air Systems:

  • Regularly vacuum and clean out your heating vents and fan blower.
  • Check the condition of your chimney and vent pipe to make sure that none of the parts are damaged or show signs of deterioration.
  • Test the thermostat occasionally to make sure your heating system is working at optimal levels. There could be a safety concern if your heater is not properly heating your home.

Heat Exchangers:

  • Heat exchangers should be inspected often to prevent carbon monoxide leaks. Check for any obvious issues, such as rust or other damages.
  • The heat exchanger for furnaces should be inspected by a professional once a year in case there are hidden problems with the equipment, or if any of the components need to be replaced.
  • Check the pilot light in gas furnaces for any flickers or changes in color. Have someone turn up the thermostat while you watch the light, but turn off the system for five minutes first. If there are any changes, there could be a problem with the heat exchanger. Call a Comus professional if you suspect issues with your heat exchanger.

Heating Equipment Inspections and Adjustments:

  • Boilers should be drained regularly to reduce sediment buildup, in addition to testing the water level safety controls. It’s best to have a professional perform these tasks if you aren’t sure how to do them on your own.
  • Adjust the temperature settings if you suspect that the heater isn’t working properly, and if it doesn’t work call a professional heating technician, or if you aren’t sure how to locate or adjust the controls.
  • Check the overall equipment for cracks, rust, or any other obvious signs of damage or deterioration that could create safety hazards.

In addition to performing these tasks, call a Tuckers Air Conditioning & Heating licensed heating contractor to inspect your heating system at least once a year.

Tags: , , , ,
Posted in Services | Comments Off

Home Maintenance You Should Not Do Yourself: A Tip from New Market

Wednesday, November 30th, 2011

Everyone wants to feel handy around their New Market house and there are a lot of great things you can do to help keep your home and its various systems in tip top shape, but not everything should be on your to do list. Some tasks are dangerous or require special equipment and should only be performed by professionals. Here is a list of some such tasks and why you should avoid them:

  • Service a Gas Appliance or Furnace – If it involves a gas line, call a professional. This goes doubly so for live electrical work. You should always call someone who has the specific certification and licenses needed to work on your gas or electricity systems. They know the safety precautions and if there is a problem they will recognize it immediately and act fast to keep everyone safe.
  • Annual Maintenance – Filter changes, cleaning and other small jobs can be on your to do list, but big time maintenance done annually on your exhaust pipes, furnace or air conditioner should be done by a professional who has the equipment for it.
  • Duct Cleaning or Patching – You can clean the vents and the entry lines at your air handler just fine, but how will you reach the middle of your ducts without an industrial strength vacuum and duct cleaning system? Duct repair is similarly hard without the right equipment.
  • Remodeling of a Room – Unless you have the necessary skills and know what permits are needed, heavy duty remodeling of a kitchen, bathroom or new room should be done by someone with plumbing certification and experience.
  • Roofing Upgrades – Even just a patch on the roof should be handled by someone who is skilled and experienced in this type of work. They know the pitfalls of walking on an unsteady surface high above the ground and they can ensure the new roof will last for as long as is necessary.

There are a lot of fun things you can do around your home to keep it in good condition, but for the big stuff, always call a pro – if not for the sake of your home, for your health and wellbeing.

Tags: , , , , ,
Posted in Services | Comments Off

How Often Should I Have My Geothermal System Checked? A Question from Potomac

Wednesday, November 16th, 2011

The beauty of a geothermal system for your Potomac home is that is requires very little maintenance. They have fewer mechanical components are than other heating systems – and most of these components are underground or inside, shielded from the outdoor elements. The underground tubing usually is guaranteed to last 25-50 years and inside components are easily accessible for servicing.

Nonetheless, keeping a geothermal system working at peak efficiency is very important. If the geothermal system loses some of its efficiency, it will cost home and building owners money in energy costs, which makes little sense since geothermal system installation costs are higher than most other heating systems.

Its key component is the ground loop system, polyethelene tubing which carries refrigerant from below the Earth’s surface and back to an above-ground compressor. When installed correctly, the buried ground loop can last for decades. A leak in the metal tubing is usually the only problem if the ground loop is not installed correctly. In the case of a leak, it may be necessary to dig up the tubing – often installed at least ten feet below the surface – and repair the leak.

Other geothermal system components include its air handling unit, compressor, and pump. These components require periodic system checks by qualified professional heating and cooling technicians. Maintenance normally requires filter changes and component lubrication, to name the most common. In some cases, building owners can perform their own filter replacement and refill of lubricants. However, it is recommended that an experienced technician perform a multiple-point inspection of the geothermal system components, usually during regularly scheduled service calls.

Tags: , , , ,
Posted in Services | Comments Off

Furnace Fan Doesn’t Run? Why Is That? What Should You Do? A Guide from Barnesville

Wednesday, November 9th, 2011

There are several reasons that a furnace fan might stop working at one point or another. While many of these do require Barnesville professional‘s attention, there are probably some things you can check on your own before you go and call in the pros. After all, if you can address the problem on your own, it will at least save you from having to pay a technician to come out.

The first thing to check when your furnace is running but the fan isn’t turning is whether or not the fan is actually switched on. Certain models of furnaces have a separate switch to turn the fan on and off. While there is probably no reason that you would want to turn off the fan by itself, it’s worth taking a look just in case. If that really is the problem, you’ll be up and running and back to dealing with better things in no time.

If that’s not the problem, you might try looking to see if any wires leading to the fan are loose or the fuse is blown. If the fan has no power, of course, it won’t be able to work but the rest of the furnace likely would work just fine as long as it doesn’t run on electricity as well.

Of course, the problem very well may be beyond your power to solve on your own. Don’t despair though. Even though you need to call in a professional, that doesn’t mean that the problem will be expensive to fix. In fact, it may be as simple as replacing your thermostat or the motor for the fan itself.

Just because a fan isn’t working doesn’t mean that you’re going to be paying an arm and a leg to have work done on your furnace. If you can’t easily discover the problem on your own, however, or if you’re not comfortable inspecting this type of equipment at all, you’re generally better off just calling in an expert and letting them do the dirty work for you. Paying for simple furnace fan repairs is definitely preferable to having to pay someone to fix the fan and the stuff you broke yourself while trying to fix the fan on your own.

Tags: , , , , , ,
Posted in Services | Comments Off

How to Maximize Savings in Your Home in Kensington

Friday, September 16th, 2011

When you are thinking about different ways you might be able to save money around your Kensington house, the tendency is to think big. Maybe you need to upgrade to a more energy efficient furnace, or it could be time to install a new central air conditioning system. Maybe it is even a good idea to switch to geothermal heating.

But before you do any of that, you may want to try some quick and easy ways to save money around the house with the equipment you already have. Here are 10 great ways to cut your power usage and keep those energy bills down without investing a lot in new equipment.

  1. Seal Up Your House – No matter how energy efficient the heating and cooling systems are in your house, you will be using more energy than necessary if your house is not tightly sealed. Make sure there are not cracks or places where drafts can get in and you will start saving money right away.
  2. The Right Thermostat Setting – Are you really going to notice the difference between 72°F and 69°F? Probably not, but you will save about 3% off of your monthly heating bill for every degree you turn the thermostat down. The same goes in the summer too, just backwards.
  3. Programmable Thermostats – And while we are on the subject of thermostats, it is a good idea to invest in a new one with programmable settings. That way you will be able to set your house to be warm when you will be there and you do not have to pay to keep it warm all day long if it is empty.
  4. Ceiling Fans – Ceiling fans can help keep you cooler in the summer and warmer in the winter. Plus, they cost very little to run so they are a great investment.
  5. Light Bulbs – Switching to energy efficient fluorescent bulbs all over your house will save you a ton even though they cost a bit more to begin with.
  6. Lights Out – But energy efficient bulbs will only get you so far. You should also be sure to turn off the lights in any room you are not using.
  7. Power Strips – Many home appliances draw a small amount of power even when they are not turned on. Use a power strip to easily cut the power to them completely and eliminate that drain.
  8. Sealing Windows – Plenty of air can come and go through your windows as well. Upgrading to more energy efficient windows is certainly an option, but you can also help to seal up your home inexpensively by covering your windows with plastic.

Tags: , , , ,
Posted in Services | Comments Off

Quick Tips to Save Money on Air Conditioning in Comus

Friday, September 2nd, 2011

You’ve probably heard once or twice that the cost of running your air conditioner is more than that of any other single electrical device in your Comus house. That means you’re spending hundreds and possibly even thousands of dollars each and every year to stay cool. It’s well worth the investment as the risk of not having air conditioning is much too high, but there must be ways to cut the costs, right? With careful attention to how your AC operates and when you use, there are some things you can do to slash those costs. Here are a few of the easiest:

  • SEER Matters – What is this magical acronym you hear so much? SEER refers to how many BTUs your air conditioner can produce with a single watt of electricity. A low SEER device therefore uses a LOT more electricity to produce the same volume of cooling as a high SEER device. Since current devices offer SEER of 13 or higher (some are up to 20+), just about any upgrade will save you money relatively quickly if your current air conditioner has a rating of 8 or lower.
  • Program Your AC – If you have a single point analog thermostat, you’re wasting a LOT of electricity. You’re either paying to cool your house while it’s empty or you’re coming home to a roasting hot living space. Purchase a programmable thermostat and set the system to 85 degrees when you’re not home. With timers in most digital units, you can tell it when you’ll be home so that you walk into a cool, comfortable space without having to keep it cool all day long.
  • Use the Landscape to Your Advantage – Instead of relying solely on your air conditioner to keep the house cool in the summer, plant some trees and shrubs around the house to block the sunlight. Simply adding some shade to your property can directly reduce how much heat your home absorbs throughout the day and reduce how much your AC unit needs to work to keep you cool.
  • Ventilate Your Roof – A good third of the heat in your home is absorbed directly through the roof. To keep this heat from affecting the rest of your home, install a roof fan that ventilates the excess energy and keeps the attic at a steady temperature. Less heat up top means less cooling needed down low.

A good air conditioning system is effective no matter what the temperature does, so it’s easy to forget how big your bill will soon be. To avoid an overblown bill, keep an eye on your cooling and follow these simple tips to cut back on use.

Tags: , , , ,
Posted in Services | Comments Off

Control Your Comus Home’s Moisture – Humidity Is Key

Friday, August 19th, 2011

Most people don’t give a second thought to humidity until it is either much too high or uncomfortably low. And if you have a state of the art home comfort system, you’re probably comfortable inside all year long anyway. But there are several reasons to pay attention to the humidity level in your Comus home and take action if you realize that it isn’t providing the comfort level you’ve come to expect.

Many problems arise from excess or inadequate indoor humidity levels. For instance, a lack of humidity causes your skin and nasal passages to dry and crack, which is obviously pretty unpleasant. But air that’s too dry can also make the symptoms of allergies, asthma and colds worse. Anyone in your home suffering from these conditions will be much more comfortable when the right level of humidity is restored. Another great benefit is that the indoor air quality will no longer contribute to longer and more sever colds and flus in the winter.

Too much humidity is a problem too, though. It promotes the growth of mold, which is a big contributor to indoor air pollution. Mold spores are a big time allergen. The more moisture there is in your home, the more mold there’s likely to be. High indoor humidity levels also promote the growth of dust mites, another major indoor air contaminant and allergen.

Of course, you probably have a great indoor air cleaner in place to get all of those contaminants out of your home’s air supply. But if the air inside your home is too moist or too dry, it can actually make it harder for the air cleaner to remove all types of contaminants. Not only are you putting a greater strain on your body and immune system, you’re asking your air cleaners to work much harder, which can cost you money in repairs and filter replacements.

For all of these reasons, it’s important to put in a humidification system to maintain the overall quality of your indoor air. Plus, a properly humidified environment is simply more comfortable to live in. A humidifier can easily be integrated into your current home heating and cooling system, so you don’t have to worry about high installation costs or equipment compatibility. All you have to do is sit back, relax and breathe in the fresh air that your humidification system makes possible.

Tags: , , , , ,
Posted in Services | Comments Off

Savings Found with Fan Coil Units: Some Pointers From Hillandale

Wednesday, August 17th, 2011

There are a lot of options on the market for your Hillandale home comfort system, but not all of them are created equally. So, if you’re starting to research air conditioners, make sure you include every possible option in your search – you never know which one will turn out to work best for you.

One excellent cooling device is a fan coil unit. These are simple mechanisms, basically consisting of a fan and a cooling or heating coil. They can be installed in any type of building, from large commercial to residential, and are great for cooling all of those hard-to-reach places that traditional air conditioning systems just can’t reach.

Where the Savings Comes From

In addition to being extremely convenient, fan coil units are quite cost-effective as well. To begin with, their simple design makes them relatively inexpensive to purchase and install. In fact, they require very little labor when compared to just about any other type of cooling device, and that saves you a ton of money up front.

This is especially true if your home or building doesn’t have ductwork installed already. In fact, the largest chunk of the installation cost for a central air conditioning system is the installation of the necessary air ducts. But because they don’t require air ducts to provide you with temperature conditioned air, fan coil units carry with them a much lower installation cost.

But the savings don’t stop there. Fan coil units are also extremely energy efficient to run. That means they’ll keep your monthly energy bills to a minimum as they provide hours of constant cooling even during the hottest parts of the year.

Fan coil units also save you money on your cooling costs because you can control each unit independently of the others. Unlike a central air conditioner that will cool your entire home to a particular temperature, you can use a fan coil unit to cool only the areas of your home that are in use at the moment. That means that you’re not wasting energy to cool empty space, and that can add up to a significant savings over time.

Tags: , , ,
Posted in Services | Comments Off

Air Conditioners and Energy Use by Percentage

Monday, July 25th, 2011

It’s no secret that air conditioners use up a lot of electricity and can add substantially to your energy bills during those warm summer months. But did you know that they actually account for an estimated 11% of the total energy used in all buildings in the US each year? This is a staggering figure and makes it easy to see why it’s best to invest in the most energy efficient system possible.

Keeping Your Consumption Down

There are plenty of reasons to try and keep your energy consumption down. You want to save on your energy bills, and the less energy you use, the better it is for the environment. The best and most straightforward way to go about this is to purchase only highly energy efficient appliances and equipment, and that includes air conditioners.

Because air conditioner usage accounts for such a substantial part of the total energy used in this country, putting more energy efficiency models into use is the best way to cut that usage down.

Supplementary Cooling

However, there are other ways to reduce the workload of your air conditioner. For instance, you can use a ceiling fan to maintain good air circulation and keep your home cool. Using a ceiling fan with an air conditioner, even on the hottest days of the year, allows you to turn up your thermostat a bit to conserve energy while still enjoying a comfortable indoor environment. And because ceiling fans use so little energy to operate, you’ll come out ahead on your energy bill.

Passive Cooling

There are also several passive cooling methods you can employ to keep the temperature in your home down. Blocking out sunlight is the most important of these, so keep your blinds closed on any windows that receive direct sunlight, particularly in the early afternoon. Alternately, you can have awnings put up, which allow you to block the direct sun while still keeping the blinds open.

Shade is another effective passive cooling device. Planting trees around your home to block out the sun at the hottest times of day is a totally energy-free way of keeping your home cool and reducing the workload on your air conditioning system. The less your air conditioner has to work, the less energy it consumes and the lower your energy bills will be.

Tags: , , ,
Posted in Services | Comments Off

« Older Entries