Skip navigation

Exceeding Expectations since 1995

Menu

Tuckers Air Conditioning, Heating & Plumbing Blog

A Question from New Market: What Are the Different Types of Furnace Maintenance?

If you haven’t done so already, take your automobile owner’s manual out of your glove box and check out the section where it lists regularly scheduled maintenance. You will probably see that the most frequent maintenance tasks are changing the oil, checking fan belts, changing windshield wipers blades, checking all fluids, and checking tire pressure. These are regular, routine tasks. You will also see other tasks like changing fuel filters, flushing radiators, and changing transmission fluid.

Depending on its frequency, there are different types of maintenance tasks associated with keeping your automobile in tip top shape. Did you also know there are tasks that can be performed at various intervals to keep your New Market home’s furnace in peak running condition? Well, there are.

For example, the most frequent maintenance task is checking the filters in your air handling unit. These are often called furnace filters but in reality, they serve the same function to filter air to and from your air conditioner, too. It might be easiest to just call them air filters. The frequency of replacing or cleaning air filters usually depends on the type of indoor environment you live in – like humidity levels, number of household pets or occupants, etc. In general, filter maintenance should occur every one to three months.

A less frequent maintenance task is cleaning the moving parts of the internal mechanism. You may only need to have your furnace cleaned every six months to a year, depending on its use. In some cases you can perform the cleaning yourself or it is included in an annual cleaning as part of a service agreement with a qualified heating and cooling contractor. A furnace can typically run at peak efficiency when it is cleaned on an annual basis.

You can also make it a regular habit of checking the motor bearings and fan belt, too. You can lubricate the bearings and tighten or replace the fan belt on a same schedule as cleaning the moving parts.

Other maintenance tasks related to your furnace, which may require longer interval times include ventilation system cleaning, or more commonly known as duct cleaning. Some homes don’t require this type of maintenance more than every five to ten years – perhaps longer. Unless there are unusually high levels of dust, allergens, or contaminants in the air, most ventilation systems can remain clean for several years.

Of course, you can turn all of your maintenance tasks over to a heating and cooling contractor – and have the most peace of mind.

Comments are closed.