Tuckers Air Conditioning, Heating & Plumbing Blog: Posts Tagged ‘Barnesville’

Heating Maintenance Tip: Downflow Gas Furnaces

Wednesday, January 11th, 2012

Proper care of a downflow gas furnace starts with proper installation and continues through routine cleaning and maintenance. But before you can even have a downflow gas furnace installed in your Barnesville home, you need to make sure it’s the right fit for your home.

Downflow gas furnaces are so named because of the direction that air flows through them. The cooler air is taken in at the top and directed downward, heating up as it travels, and then is expelled through the bottom of the furnace into ducts that feed the rest of the house. Because of this configuration, downflow  gas furnaces are typically installed in attics as opposed to basements.

If you have a basement and you’d rather install your furnace there, then an upflow furnace is probably the better choice for you. However, as many newer homes don’t have basements at all, downflow gas furnaces are growing in popularity and usefulness.

As with any other furnace, it’s important to have a downflow gas furnace professionally installed. This will ensure that the venting system is properly in place and that your house will be heated as effectively and efficiently as possible.

Of course, there are some other things you can do to help your furnace heat your home and keep your energy bills down. For instance, make sure you have proper insulation everywhere, particularly in the attic and crawlspaces where much of the normal heat loss in a home occurs.

You can also make your home more airtight in the winter by sealing up any unused windows and doors with plastic and making sure all storm windows are in place. Basically anyplace that a draft could develop, you could be losing heat and that costs you money. So to ensure that all of the money you’re spending to heat your house is actually going to that purpose, check periodically to make sure your home is still sealed up tight.

Also, just like any other type of furnace, a downflow gas furnace will require regular maintenance to make sure it continues to run efficiently and to replace any parts that may have worn out over time. Having a Barnesville professional technician come out once a year to carry out this type of service will wind up saving you a bunch of money and can help catch problems before they are able to get out of hand.

Continue Reading

A Question from New Market: What Are the Different Types of Furnace Maintenance?

Monday, December 19th, 2011

If you haven’t done so already, take your automobile owner’s manual out of your glove box and check out the section where it lists regularly scheduled maintenance. You will probably see that the most frequent maintenance tasks are changing the oil, checking fan belts, changing windshield wipers blades, checking all fluids, and checking tire pressure. These are regular, routine tasks. You will also see other tasks like changing fuel filters, flushing radiators, and changing transmission fluid.

Depending on its frequency, there are different types of maintenance tasks associated with keeping your automobile in tip top shape. Did you also know there are tasks that can be performed at various intervals to keep your New Market home’s furnace in peak running condition? Well, there are.

For example, the most frequent maintenance task is checking the filters in your air handling unit. These are often called furnace filters but in reality, they serve the same function to filter air to and from your air conditioner, too. It might be easiest to just call them air filters. The frequency of replacing or cleaning air filters usually depends on the type of indoor environment you live in – like humidity levels, number of household pets or occupants, etc. In general, filter maintenance should occur every one to three months.

A less frequent maintenance task is cleaning the moving parts of the internal mechanism. You may only need to have your furnace cleaned every six months to a year, depending on its use. In some cases you can perform the cleaning yourself or it is included in an annual cleaning as part of a service agreement with a qualified heating and cooling contractor. A furnace can typically run at peak efficiency when it is cleaned on an annual basis.

You can also make it a regular habit of checking the motor bearings and fan belt, too. You can lubricate the bearings and tighten or replace the fan belt on a same schedule as cleaning the moving parts.

Other maintenance tasks related to your furnace, which may require longer interval times include ventilation system cleaning, or more commonly known as duct cleaning. Some homes don’t require this type of maintenance more than every five to ten years – perhaps longer. Unless there are unusually high levels of dust, allergens, or contaminants in the air, most ventilation systems can remain clean for several years.

Of course, you can turn all of your maintenance tasks over to a heating and cooling contractor – and have the most peace of mind.

Continue Reading

Heating Tip: Heat Pump Load Calculation

Monday, December 12th, 2011

When purchasing a heat pump in Chevy Chase, the first thing you should do is determine what type of heat pump you want and how big it needs to be to provide ample heating and cooling to your home. If you’re unsure what you need, here are some tips to size a heat pump for your home’s particular needs.

The Importance of Sizing

Before buying anything, consider the cost of an oversized heat pump. A lot of homeowners opt for the biggest device on the market, but they don’t realize that they’re paying more than necessary for their device. An oversized device cycles on and off more often than is necessary and wears down much faster, resulting in an increased electric bill and faster wear on the device. It’s not good for your heat pump or your wallet.

How to Size

To correctly size a heat pump, the first step is to perform a load calculation. This is done by measuring the total volume of the rooms being heated (in cubic meters) and then determining the heating factor based on the type of insulation used.

There are different measurements depending on the type and R-rating of your insulation. For example, a single external wall without any additional insulation has a heating factor of 15. The number of external walls, the insulation in those walls and/or the ceiling and the rating of the insulation will determine the total heating factor for the room.

You will then divide the room volume by the heating factor to determine the number of KW (converted to BTUs) needed to heat that particular room.

Professional Sizing

The reason it is so important to call a professional heating contractor is that certain things, like poorly insulated windows, cracks in the foundation, leaks in the ducts and other issues can have an impact on the overall heating factor measurement. Additionally, the type of heat pump you choose must be effective when connected to an air handler for your entire home. A professional can make these measurements and ensure the right sized device is selected.

If you’re unsure about anything related to sizing and selecting a new heat pump for your home, call an HVAC in. They will perform a full load calculation and present your options for a new heat pump based on those calculations.

Continue Reading

Furnace Fan Doesn’t Run? Why Is That? What Should You Do?

Wednesday, November 9th, 2011

There are several reasons that a furnace fan might stop working at one point or another. While many of these do require Barnesville professional‘s attention, there are probably some things you can check on your own before you go and call in the pros. After all, if you can address the problem on your own, it will at least save you from having to pay a technician to come out.

The first thing to check when your furnace is running but the fan isn’t turning is whether or not the fan is actually switched on. Certain models of furnaces have a separate switch to turn the fan on and off. While there is probably no reason that you would want to turn off the fan by itself, it’s worth taking a look just in case. If that really is the problem, you’ll be up and running and back to dealing with better things in no time.

If that’s not the problem, you might try looking to see if any wires leading to the fan are loose or the fuse is blown. If the fan has no power, of course, it won’t be able to work but the rest of the furnace likely would work just fine as long as it doesn’t run on electricity as well.

Of course, the problem very well may be beyond your power to solve on your own. Don’t despair though. Even though you need to call in a professional, that doesn’t mean that the problem will be expensive to fix. In fact, it may be as simple as replacing your thermostat or the motor for the fan itself.

Just because a fan isn’t working doesn’t mean that you’re going to be paying an arm and a leg to have work done on your furnace. If you can’t easily discover the problem on your own, however, or if you’re not comfortable inspecting this type of equipment at all, you’re generally better off just calling in an expert and letting them do the dirty work for you. Paying for simple furnace fan repairs is definitely preferable to having to pay someone to fix the fan and the stuff you broke yourself while trying to fix the fan on your own.

Continue Reading

Types of Air Filters (and Happy Halloween Weekend!)

Friday, October 28th, 2011

Happy Halloween weekend from everyone at Tuckers Air Conditioning & Heating! We hope you have a fantastically spooky time! And since bad indoor air quality can be quite scary, here is some information about the different types of air filters you can get for your home.

When choosing an air filter for your home, there are many options. Each type of material is designed to capture a different type of particle to a different degree, so make sure you choose carefully based on the specific air quality problems your home has.

  • Disposable – Disposable filters are the simplest and least expensive option on the market but they are usually rated as low as 1-5 MERV and don’t last very long. These types of filters are usually designed for basic mechanical filtration to stop debris from causing problems for your furnace or air conditioner and are therefore not ideal for actual air quality improvement.
  • Fiberglass – Fiberglass filters are very common in almost all HVAC systems and are more permanent than disposable filters. They come in MERV ratings of between 4 and 12 and are highly efficient at capturing larger particles like dust, pollen and dander. These can be dangerous, however, as they fragment and can send fibers into the air.
  • Polyester – These have a higher resistance rating than most fiberglass filters and are therefore more durable against larger particles like dust and pollen. They also don’t fray like fiberglass and are more durable over time.
  • Electrostatic – Electrostatic filters have a charge to help collect dust particles and are usually made with multiple layers of polypropylene material.
  • HEPA Filters – This is a completely different category of filters and is designed to capture everything as small as 0.3 microns – well below the threshold most commonly provided by standard HVAC filters. They can be purchased for your HVAC system or as standalone filters for individual rooms.

There are a number of different filter types to maintain the air quality in your home. If you’re interested in getting the most out of your home’s air quality control system, make sure you do it with the best possible device available to your system. Contact a professional if you’re not sure what options will suit you best.

Continue Reading

Will Switching to Geothermal Save Me Money? A Question from Barnesville

Wednesday, October 12th, 2011

There are simply a ton of different types of heating systems available in Barnesville and they are each more appropriate in different situations. However, some are certainly always going to be cheaper to operate than others, although that alone may not make one or the other right for you.

In the case of geothermal heating systems, the operating costs are definitely quite low. But those are not the only costs you will have to think about when you are considering what type of heating system to put in your home to keep your heating bills down.

Geothermal heating systems do not actually generate heat – they absorb it from the ground. Because of this, they actually use very little energy when they are running. All you are really paying to power is the fan that blows the heated air around your house. Also, because geothermal heating systems are more efficient at extracting heat in below freezing conditions than traditional heat pumps, they can continue to keep you warm on their own in more extreme conditions.

Traditional heat pumps, while they also cost very little to operate, do sometimes need to be supplemented by more conventional forms of indoor heating like a furnace when temperatures outdoors get too low. This is not the case with geothermal heat pumps, so if you live somewhere that has colder winters, a geothermal heat pump may be just what you are looking for. Of course, you can always opt for a furnace instead, but these will definitely cost more to run than either type of heat pump.

Continue Reading

How Does a Heat Pump Work? A Question From Barnesville

Monday, October 3rd, 2011

If you’re in the market for a new home heating and cooling system in Barnesville, a heat pump is definitely an option worth considering. However, while the popularity of these systems is growing rapidly, many people still don’t understand what they’re all about. Before you go out and get yourself a new home comfort system, you should make sure you really know what you’re looking at

As their name suggests, heat pumps move heat from one location to another. However, their name can be misleading as well. Heat pumps are able to both heat your home in the winter and keep it cool in the summer by taking heat from the air in one place and sending it to another.

For example, your heat pump will remove the heat from your indoor air in the summer and pump it outside to keep your home cool. In the winter, the process is reversed, and the heat pump gathers heat from the outdoor air and pumps it inside to keep you house warm.

Of course, it’s not hard to see how the air inside your home in the summer has heat in it. But the outdoor air in the winter is cold. So how does a heat pump heat your house with cold air? Well, the truth is that there is almost always some heat in the air, no matter how cold it seems to you and me.

In fact, the temperature would have to drop well into the negative range before there was absolutely no heat to be found in the air. And heat pumps are specially designed to find that heat and collect it.

Basically all heat pumps work on this principle. However, they can’t keep your house comfortable all on their own. Heat pumps are usually installed as part of a complete home heating and cooling system. This means they’ll be paired with an air handler that can circulate the temperature controlled air throughout the house.

There are also some heat pumps that supplement the amount of heat they’re able to pull out of the air by heating it as it passes through. These types of heat pumps are often more effective in cooler areas, but because they require more energy to actually generate heat, they’re not typically as energy efficient as models that rely on their ability to get heat only out of the air.

Continue Reading

Is Your Home More Valuable with Energy Efficient Appliances? A Question From Burtonsville

Monday, September 12th, 2011

It’s impressive the things people do to improve the value of their Burtonsville home. We’re talking about crown molding, new floors, new siding, upgrades to the landscaping and much more. The cost of upgrading these things can grow out of hand quickly and if the boost to your home’s value isn’t equally exponential, it’s hard to justify the expense.

So, it’s always nice to find a simple upgrade that can be performed for a few hundred dollars that will save you money immediately and improve the value of your home in the future. Your appliances are one such upgrade.

The Value of Energy Efficiency

An energy efficient washing machine can save upwards of $150 per year on water costs. An energy efficient toilet cuts consumption by as much as 150%. Low flow shower heads cut water costs by one third to one half and your heating and air conditioning systems can be improved by 10-35% depending on the upgrades available to you.

When you add up all those savings, the result is a tremendous amount of money that can be saved each year on everything from your water bill to your cooling needs. Imagine what happens when someone looks to buy your home. They see that there are all new appliances with energy efficient ratings that will save them money.

It’s not just lower bills; it’s a decrease in upfront investment. On the surface, it’s unlikely that your energy efficient appliances will directly increase the value of your home, but they can increase the likelihood of someone paying what you’re asking for the home. They add value to the livability of the home, if not the property itself and in today’s housing market, that’s a major plus.

Best Upgrades

The best upgrades to your home’s appliances are the ones that save money without additional work. Major upgrades to your heating and cooling are good if you need an upgrade anyway or you plan on staying in your home for a few years.

Continue Reading

How Does Geothermal Energy Work? A Question From Brinklow

Friday, August 5th, 2011

Geothermal energy is energy extracted from the ground. This energy is in the ground in the first place because the ground absorbs the heat coming from the sun. This heat is always there, even when it is very cold outside. In fact, even when the ground appears to be frozen, you can actually extract plenty of heat to keep your home nice and toasty.

While this may at first appear to defy logic, the way that geothermal energy can be used for heating your home is actually quite simple. A geothermal heating system typically consists of an indoor air handler with a fan, a series of air ducts for the heated air to travel through and a closed loop of pipe that extends into the ground below and around your home.

This closed loop of pipe is actually where the geothermal heat is collected. Some type of liquid, usually water or antifreeze, will be continuously run through this pipe loop. As the liquid passes through the area of pipe that is below ground, it will absorb the heat from the surrounding soil. Once the liquid makes it back up to the air handler, the heat is able to disperse, heating the air in the chamber.

This heated air is then circulated throughout your house through the ducts by a fan. After it has released its heat into the air in your home, the liquid will cycle back into the ground to absorb more. This allows a geothermal heating system to provide you with a constant supply of warm air.

Unlike a furnace, which mixes in blasts of very hot air with periods of inactivity to try and keep your house at a constant temperature, a geothermal heat pump is able to provide a more consistent flow of air that is just the right temperature to keep your home comfortable. This means that these types of heat pumps are running just about all of the time as opposed to furnaces, but they are designed to work this way and the constant operation does not cause any excessive wear and tear.

Another great benefit of geothermal heat pumps is that they are able to keep your house cool in the summer as well. Just as the ground is warmer than the air in the winter, it is also cooler in the summer. That means that heat removed from your indoor air can be transferred to the ground in the same way that it was transferred in during the winter.

Continue Reading