Tuckers Air Conditioning, Heating & Plumbing Blog: Posts Tagged ‘Energy Savings’

Air Conditioning Question : Should I Run a Ceiling Fan and AC at the Same Time?

Monday, June 25th, 2012

One common question is whether there is any savings to be had in running a ceiling fan along with an air conditioner. The logic is that if a fan moves air around and helps you feel cool, then it can take away some of the cooling work of the AC and do it at a fraction of the cost.

But does this rationale hold water?

The Short Answer: Yes.

Simply put, the logic behind this question is sound. The ceiling fan helps circulate the cooled air through the room better than air conditioning alone, plus the velocity of the moving air makes you feel cooler. These effects allow you to bump up the thermostat a few degrees to lighten the burden on your AC, without decreasing your comfort level.

The Longer Answer: Yes, when used correctly.

Sounds great, right? All you have to do is leave your ceiling fans running, bump the thermostat up a few degrees and watch the savings roll in, right?

Turns out it’s a little more complicated than that.

Running your ceiling fans in conjunction with your AC will save you money by making the room feel cooler…but that effect only works when you’re actually in the room. This is because fans don’t actually cool the air, they just make you feel cooler by moving air swiftly past your skin, which helps evaporate sweat, among other things.

So, when your AC and fan are on at the same time, the fan enhances your perception of how cool the room is. But, if the room is empty, the fans are just spinning futilely because there’s no one in there to enjoy the effects of the moving air. In the end, this practice can actually cost you money.

To maximize both your comfort and your savings, feel free to turn ceiling fans on in rooms that you are both cooling and actively using. If you’re not, then go ahead and turn the fans off. For more questions about how to effectively use your air conditioner in Gaithersburg, give Tuckers Air Conditioning & Heating a call today at 301-670-0034!

Continue Reading

Make Your Next HVAC Purchase Your Last One!

Wednesday, April 18th, 2012

Make Your Next HVAC Purchase Your Last One

Tuckers is now proud to be the only contractor offering a 15 Year Part & Labor warranty.  Along with our Lifetime Unit replacement when a compressor or heat exchanger fails, your next purchase of HVAC equipment could be your last.

Click here to read more

Bethesda | Earth Day | Tuckers Heating and Air Conditioning

Celebrate Earth Day by Conserving Energy and Improving your HVAC System

Earth Day will be here soon, so you’ll want to start thinking of ways you can help the environment. This year, celebrate earth day by making a commitment to start saving energy. Even the smallest improvements, such as using compact florescent lights and installing programmable thermostats, can add up over time. Remember that routine maintenance for your HVAC system can help save energy, and you always have the option of getting a professional energy audit to help you resolve home performance issues.

Click here to read more

Continue Reading

Heating Advice: Simple Steps to Prevent Heat Loss

Friday, February 24th, 2012

There are two fundamental ways to make your Silver Spring house warmer. One is to generate heat, which is the job of your furnace or boiler. The second is to keep the warm air in — and thereby keep cold air out — which is the job of your system of insulation.

The idea that the physical structure of a home can be a component of the HVAC system is one that is often overlooked, but when you think about it, it makes sense. The insulation, windows, doors and building materials that comprise your home are designed to keep the place warm against the cold and vice versa.

So, when bolstering your HVAC system to promote efficient heating, it is important to also consider heat loss and how to prevent it. This is a process that can get out of hand if you go overboard, so it is important to prioritize. Let’s look at the top 3 places to start when trying to prevent heat loss.

  1. Doors and Windows:  If you have older doors and windows, they could be a source of heat loss in your house, even if they are always closed. Replacing your windows and door with Energy Star rated ones will make sure that you are not losing heat to the outside AND still getting all the heat energy from the sun. Installing storm windows or putting up heavy curtains in winter can also help cut down on your heat loss.
  1. Seal off drafts. If any opening to your house, such as windows and doors, is improperly sealed, improperly installed or if the surrounding construction is deteriorating, you can lose a lot of heat. Check any drafts that you notice that might indicate a problem, and also if your vents and air ducts are leaky.
  1. Start at the top. If you want to go farther in sealing your house up against the cold, it is time to work on the insulation. When installing new insulation, remember that heat rises, so you get the most bang for your buck by starting at the top. If you only have the budget or time to insulate one space, make it the attic. You can work down from there.

These areas should be your top three priorities on your mission to prevent heat loss in your Silver Spring home. If you start here, you will get the best gains with the least effort. For more information on how to reduce you heat loss, give Tuckers Air Conditioning & Heating a call!

Continue Reading

The Energy Star Label: A Guide from Garrett Park

Friday, October 21st, 2011

The Energy Star program is a joint program of the US environmental protection agency and the US department of Energy. The program’s goal is to help consumers, from Garrett Park to Sandy Spring,  save money and protect the environment through energy-efficient products and practices.

The best-known aspect of the Energy Star program is the Energy Star label, which is awarded to appliances and other items that are significantly more efficient than average. Energy Star efficiency guidelines vary depending on product category, but in general, Energy Star products use 20%-30% less energy than minimum federal standards.

The Energy Star guidelines were designed both with energy efficiency and performance in mind. While low energy use is one of the most important criteria for selecting Energy Star appliances, product performance, features, warranty, safety, and durability are also taken into account. Price is also a factor: if a product costs significantly more than other products in its category, it will only receive the Energy Star label if the up-front cost will be recovered through savings in operating costs within a reasonable amount of time.

The first Energy Star labels were given to computers and monitors in 1992. Now labels can be found on many other products, including:

Energy Star products can be found wherever appliances and electronics are sold. Look for the blue and white Energy Star label. You can also look for the yellow EnergyGuide label that is affixed to most heating and cooling systems and household appliances. This label is created by the Department of Energy and shows a product’s annual cost of operation compared to similar models. It will often indicate whether a product is Energy Star.

It’s important to note that while an Energy Star label indicates that a heater, air conditioner, or household appliance is more efficient than the minimum guidelines, it does not always mean that you are getting the most energy efficient option on the market. If you are making a major appliance purchase, use the Energy Star label to be sure every model on your “short list” is energy efficient. Then, look carefully at the EnergyGuide label to compare the efficiency of the models you are considering.

The EPA has also extended the Energy Star label to cover new homes and commercial and industrial buildings. To qualify for the Energy Star rating, a new home must use at least 15% less energy than standard homes (built to the 2004 International Residential Code). Energy Star homes usually include insulation, high-performance windows, energy-efficient heating and cooling systems, appliances, lighting, and water heaters.

The Energy Star standards and label have been recognized in many other countries, including Canada, Australia, Japan, New Zealand, Taiwan and the European Union.

Continue Reading

Will Switching to Geothermal Save Me Money? A Question from Barnesville

Wednesday, October 12th, 2011

There are simply a ton of different types of heating systems available in Barnesville and they are each more appropriate in different situations. However, some are certainly always going to be cheaper to operate than others, although that alone may not make one or the other right for you.

In the case of geothermal heating systems, the operating costs are definitely quite low. But those are not the only costs you will have to think about when you are considering what type of heating system to put in your home to keep your heating bills down.

Geothermal heating systems do not actually generate heat – they absorb it from the ground. Because of this, they actually use very little energy when they are running. All you are really paying to power is the fan that blows the heated air around your house. Also, because geothermal heating systems are more efficient at extracting heat in below freezing conditions than traditional heat pumps, they can continue to keep you warm on their own in more extreme conditions.

Traditional heat pumps, while they also cost very little to operate, do sometimes need to be supplemented by more conventional forms of indoor heating like a furnace when temperatures outdoors get too low. This is not the case with geothermal heat pumps, so if you live somewhere that has colder winters, a geothermal heat pump may be just what you are looking for. Of course, you can always opt for a furnace instead, but these will definitely cost more to run than either type of heat pump.

Continue Reading

Troubleshooting Thermostat Issues: A Guide From Brinklow

Wednesday, October 5th, 2011

If your room temperature in your Brinklow home is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in the home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Continue Reading

How to Maximize Savings in Your New Market Home

Friday, September 23rd, 2011

When you are thinking about different ways you might be able to save money around your New Market house, the tendency is to think big. Maybe you need to upgrade to a more energy efficient furnace, or it could be time to install a new central air conditioning system. Maybe it is even a good idea to switch to geothermal heating.

But before you do any of that, you may want to try some quick and easy ways to save money around the house with the equipment you already have. Here are 8 great ways to cut your power usage and keep those energy bills down without investing a lot in new equipment.

  1. Seal Up Your House – No matter how energy efficient the heating and cooling systems are in your house, you will be using more energy than necessary if your house is not tightly sealed. Make sure there are not cracks or places where drafts can get in and you will start saving money right away.
  2. The Right Thermostat Setting – Are you really going to notice the difference between 72°F and 69°F? Probably not, but you will save about 3% off of your monthly heating bill for every degree you turn the thermostat down. The same goes in the summer too, just backwards.
  3. Programmable Thermostats – And while we are on the subject of thermostats, it is a good idea to invest in a new one with programmable settings. That way you will be able to set your house to be warm when you will be there and you do not have to pay to keep it warm all day long if it is empty.
  4. Ceiling Fans – Ceiling fans can help keep you cooler in the summer and warmer in the winter. Plus, they cost very little to run so they are a great investment.
  5. Light Bulbs – Switching to energy efficient fluorescent bulbs all over your house will save you a ton even though they cost a bit more to begin with.
  6. Lights Out – But energy efficient bulbs will only get you so far. You should also be sure to turn off the lights in any room you are not using.
  7. Power Strips – Many home appliances draw a small amount of power even when they are not turned on. Use a power strip to easily cut the power to them completely and eliminate that drain.
  8. Sealing Windows – Plenty of air can come and go through your windows as well. Upgrading to more energy efficient windows is certainly an option, but you can also help to seal up your home inexpensively by covering your windows with plastic.

Continue Reading

New Thermostats – Are they Worth the Investment? A Question From Brinklow

Wednesday, September 21st, 2011

When you are trying to save money around your Brinklow house, a new thermostat is definitely worth looking into. Sure, your old thermostat works fine. But there are a lot of features available on newer models that can help you save money on your heating and cooling costs throughout the year.

And you do not need to wait until it is time to replace your home comfort system to upgrade your thermostat. Most thermostats can work with many different types of heating and cooling systems. So no matter what type of HVAC system you have or how old it is, you should be able to integrate some type of new thermostat into it.

But how can a new thermostat save you money? Well, they simply offer a lot of features that you can use to your advantage. For instance, even the most basic programmable thermostat can let you set different temperatures for different times of day. You can program the thermostat to turn the heat down during the day when no one is home and then you can have the heat switch back on just before you get home.

That way, you can come home to a nice, warm house without having to pay to heat it all day long when it is empty. Many newer thermostats also are more accurate and can provide more pinpoint control of your heating and cooling system. That means that you will not be wasting money because your heating system gets the actual temperature in your house up to 75°F when you only really need it to hit 72°F.

Newer thermostats help you to save money in a variety of ways, and that savings will more than pay for the cost of having a new thermostat installed. That is because thermostats are actually quite cheap and easy to install. A relatively basic programmable thermostat should not run you more than $100, and even if you opt for one of the more advanced systems out there, you will not pay more than a few hundred dollars.

That is a small price to pay considering the increased comfort possible with a state of the art thermostat and the potential for savings every month on your heating or cooling bills. Plus, you likely paid a considerable amount to have that state of the art HVAC system put in. It is worth paying just a bit more so that you can get the most possible out of it.

Continue Reading

How to Maximize Savings in Your Home in Kensington

Friday, September 16th, 2011

When you are thinking about different ways you might be able to save money around your Kensington house, the tendency is to think big. Maybe you need to upgrade to a more energy efficient furnace, or it could be time to install a new central air conditioning system. Maybe it is even a good idea to switch to geothermal heating.

But before you do any of that, you may want to try some quick and easy ways to save money around the house with the equipment you already have. Here are 10 great ways to cut your power usage and keep those energy bills down without investing a lot in new equipment.

  1. Seal Up Your House – No matter how energy efficient the heating and cooling systems are in your house, you will be using more energy than necessary if your house is not tightly sealed. Make sure there are not cracks or places where drafts can get in and you will start saving money right away.
  2. The Right Thermostat Setting – Are you really going to notice the difference between 72°F and 69°F? Probably not, but you will save about 3% off of your monthly heating bill for every degree you turn the thermostat down. The same goes in the summer too, just backwards.
  3. Programmable Thermostats – And while we are on the subject of thermostats, it is a good idea to invest in a new one with programmable settings. That way you will be able to set your house to be warm when you will be there and you do not have to pay to keep it warm all day long if it is empty.
  4. Ceiling Fans – Ceiling fans can help keep you cooler in the summer and warmer in the winter. Plus, they cost very little to run so they are a great investment.
  5. Light Bulbs – Switching to energy efficient fluorescent bulbs all over your house will save you a ton even though they cost a bit more to begin with.
  6. Lights Out – But energy efficient bulbs will only get you so far. You should also be sure to turn off the lights in any room you are not using.
  7. Power Strips – Many home appliances draw a small amount of power even when they are not turned on. Use a power strip to easily cut the power to them completely and eliminate that drain.
  8. Sealing Windows – Plenty of air can come and go through your windows as well. Upgrading to more energy efficient windows is certainly an option, but you can also help to seal up your home inexpensively by covering your windows with plastic.

Continue Reading

Turn that Thermostat Down a Degree and Save Money: A Tip From Colesville

Wednesday, September 14th, 2011

There are literally dozens of things you can do to cut back on your heating (and cooling) costs in Colesville. These range from things like getting a high energy efficiency system to just making sure that you have adequate insulation in all parts of your house. But too many people overlook one of the simplest things that you can do to cut down on your monthly heating bill, and that is to turn the thermostat down.

Of course, you did not pay for that high tech home comfort system just so that you could walk around cold all winter long. You certainly want to keep your house at a temperature that is comfortable, but what does that really mean?

The normal default setting for a home heating system is usually somewhere between 72°F and 75°F. If you have your thermostat set somewhere in this range in the winter, you are probably quite comfortable indoors. In fact, you might not even need a sweater. But would you really notice if it was a degree or two cooler? Would it be incredibly inconvenient to put on a sweater or sweatshirt after all?

The truth is that most of us will be just as comfortable at 69°F as we are at 72°F, and the effect that small adjustment can have on your heating bill is actually pretty significant. In fact, you will save an average of 3% on your monthly bill for every degree you turn your thermostat down. Drop the temperature down by three or four degrees and that will give you up to a 10% monthly savings – hardly something to turn up your nose at.

And setting the regular temperature in your house a bit lower is not the only way your thermostat settings can save you money. You will also save quite a bit if you take the time to turn down the temperature when you leave the house and when you go to bed at night. There simply is no reason to pay to heat your house when you are not there and you will certainly be rewarded with a lower energy bill for your efforts.

Continue Reading