Tuckers Air Conditioning, Heating & Plumbing Blog: Posts Tagged ‘Ijamsville’

Heating Installation Tip: Comparing High-Efficiency and Mid-Efficiency Furnaces

Wednesday, January 4th, 2012

Whenever you are in the market for a new furnace for your Ijamsville home, there are many models to choose from.  Many of the furnaces manufactured within the last few years are high-efficiency furnaces with a high AFUE rating (AFUE measures the amount of fuel the furnace converts into heat). When people refer to a mid-efficiency furnace, they are usually talking about older furnaces.

Single-stage furnaces were considered to be an efficient heating system when they were manufactured, but compared to newer furnaces, they use up a lot more energy than they need to. Single-speed furnaces are designed to run at full capacity until the temperature inside the home reaches the thermostat setting. After they shut off, the home not only loses heat, but the furnace will also take longer and burn more fuel when it cycles on again.

Newer, two-speed and multispeed models run consistently at lower speeds, and the ones with variable-speed blowers are even more efficient because they can operate at various levels. These models will also automatically adjust to the thermostat to maintain a constant temperature, which saves energy by keeping the home at a consistent temperature so that there’s little heat loss.

When shopping for a new furnace, keep in mind that the AFUE ratings for multispeed and variable-speed furnaces only determine the efficiency of the actual furnace. If you are upgrading your old, mid-efficiency furnace to a high-efficiency furnace, you should make sure that your Ijamsville home is properly insulated and sealed.  You could also consider upgrading any older doors and windows to more efficient double-paned ones, or you can also install storm doors and windows.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Heating Installation Tip: Comparing High-Efficiency and Mid-Efficiency Furnaces

Home Maintenance You Can Do Yourself

Friday, December 2nd, 2011

If you own a home in Ijamsville, there are a lot of fun ways you can stay on top of regular maintenance without spending money on a contractor. Sure, there are some tasks only a contractor should perform, but there are plenty of others you can take care of with a little spare time on the weekend.

  • Fixing Leaks – Unless it’s in a main line or in your sewer, you can usually fix a leak or clog in your pipes by yourself. Replacing a faucet, snaking a line, or taking apart a fixture should still be done with the help of manufacturer’s guidelines, but as long as you turn the water supply off correctly, you should be okay taking things apart and making quick repairs.
  • Yard Installations – Short of digging it up (always have it checked for gas and electricity lines), you can do pretty much anything on your own in the yard. This includes composting, landscaping, adding a barbeque pit or upgrading your back porch.
  • Painting – Feel free to paint anything in or around your home without the help of a pro. Just make sure to use proper ventilation and to ensure that you remove any old paint carefully. If you’re not sure about the age of your paint, it should be tested for lead before you chip it clean, especially if you have children.
  • Replace Appliances – Old appliances can be removed and replaced relatively easily as long as you have someone to help you get rid of the old ones. Also, if you have a gas stove or other appliances that run on gas, always have them checked by a professional. Never unplug gas lines without someone there to ensure the gas supply to your home is off.
  • Tiling – Tiling is something anyone can do, but make sure you’re ready for the time commitment. Especially if you plan on putting tiles on a wall, it’s easy to make a mistake and ruin good tiles or good walls. Also, proper sealing around water fixtures like a bathtub or sink is vital. If you’re not sure, call a plumber to help.

There are a lot of ways you can have fun and fix up your house without paying for a professional’s help. But, remember not to take on jobs that are too much for you. If you aren’t sure how to complete a task or you want a second opinion, never be afraid to call a pro in for some help. Even if they just check your work, it will save you money and you get the satisfaction of having done the work yourself.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Home Maintenance You Can Do Yourself

How to Replace a Thermostat: Some Pointers from Ijamsville

Wednesday, October 26th, 2011

There are a lot of common household tasks that do-it-yourselfers can handle beyond changing light bulbs or replacing a fuse. One of those is changing out a thermostat in your Ijamsville home. The reasons for replacing a thermostat can vary from making an upgrade to changing out a thermostat that is not working right – or at all. Whatever the reason, the task is pretty simple and require s very little time and very few tools.

Let’s set the stage.

The materials you will need are the replacement thermostat, wire connectors, electrical tape (optional), needle nose pliers, and a screwdriver.

Here are the steps:

  1. Turn off electrical power to the existing thermostat. You can do this by flipping a breaker switch or removing a fuse from your home’s electrical panel. This would be a good time to make a note of the circuit’s location, writing the circuit number on the panel door or using a sticker.
  2. Remove the cover from the existing unit. You should be able to locate the screws that hold it to the wall mounting plate. Remove the screws and pull the unit away from the wall and mounting plate. Be careful not to touch the electrical wires together on the thermostat.
  3. Disconnect the wiring. Carefully remove the electrical wiring from the unit and keep the wires apart. You might want to tape the bare ends and also ensure that the wires don’t fall back through the wall. If the wires are not color coded, mark each one and which terminal they were removed from. Remove the mounting plate.
  4. If you are using a new mounting plate, make sure it fits over the existing hole and then pull the wires through the opening of the plate. Make sure the mounting plate is secured to the wall with the proper screws.
  5. Now match the wires to the terminals on the new thermostat. The wires are usually color-coded but if not, make sure you attach the right wires to the corresponding numbered terminals on the next thermostat. A green wire, which operates the furnace fan blower, is connected to the “G” terminal. The white wire operates the heater and attaches to the “W” terminal. The yellow wire operates the air conditioner and connects to the “Y” terminal. Use a wire nut to secure the wires and keep them apart from other wires. Ignore any other wires coming out of the wall as they are not necessary and may have been added by the original builder for other purposes.
  6. Carefully move the wires back into the wall as you line up the new thermostat on the mounting bracket. Install the new bracket and secure the thermostat to the bracket.
  7. Turn your power back on and check your thermostat by setting the temperature high or low, to engage the furnace or air conditioner.

This simple procedure can be done in less than 10 minutes. But if you have any doubts and want greater peace of mind, call a professional heating and cooling contractor to perform the installation.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on How to Replace a Thermostat: Some Pointers from Ijamsville

Why Is Ice in Central Air Conditioning a Problem? A Question From Kentlands

Monday, August 29th, 2011

If the air conditioner in your Kentlands home does not seem to be working as well as it should, your natural first reaction is to go out and take a look at the compressor to see if there is anything you can do quickly to correct the problem. Of course, you cannot assess the situation unless you know what you are looking for. For instance, if you see ice forming on the condenser coil or anywhere else on the air conditioning system, you will know you found the likely source of the problem.

Ice can form in your air conditioner for a number of reasons. The most common one is that your refrigerant levels are low. Since this refrigerant is contained in a closed system, a deficiency in refrigerant means that there must be a leak somewhere in that system. Only a certified professional can refill your refrigerant and determine where the leaks are in the system to make the necessary repairs.

Another reason that ice can develop in your air conditioner is because the air is not flowing fast enough through the system and across the coils. This can happen because of a problem with the fan or because there is an actual physical impediment to the air flow. Regardless of the reason, the ice will form because without adequate air flow the condenser coils will get too cold.

These coils are typically kept just above freezing by the constant flow of air across them. When the air passes by them at this temperature, the moisture from the air condenses on the surface of the coil. But because the coil is not quite freezing, the water then runs down into a collection pan. When the coil is too cold, however, the moisture from the air will freeze on the coil before it can run off.

This ice actually manages to insulate the coil and keeps it from properly cooling the air or removing any additional moisture. If left unattended, the ice in your central air conditioning system can cause real damage to the unit. Plus, it is not allowing the air conditioner to do its job and cool your house down. So if you notice any amount of ice at all beginning to form on any part of your air conditioner, be sure to call for professional service right away.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Why Is Ice in Central Air Conditioning a Problem? A Question From Kentlands

2011 AC Federal Tax Credits: A Tip From Germantown

Wednesday, August 24th, 2011

You’ve probably heard many arguments for why you should purchase an energy efficient air conditioner for your Germantown home. They may cost a bit more up front, but they’ll save you money in the long run by cutting down on your monthly energy bills. They’re also better for the environment because their lower energy usage means less fossil fuels are burned to keep them running.

But there’s another reason energy efficient AC units are better buys than your standard alternative. There are Federal tax credits available to consumers who purchase them. This tax credit can more than make up for the higher purchase price of the units, allowing you to enjoy your monthly savings much sooner and know you’re doing your part to protect the environment.

How to Qualify

In order to qualify for 2011 air conditioning Federal tax credit, you need to purchase an appropriate energy efficient AC system. Your HVAC contractor or salesperson can tell you which models and units qualify for this program. Just make sure you save all documentation and proof of purchase in case you need them to validate your claim.

The AC units that qualify you for this tax credit include those with a SEER (seasonal energy efficiency ratio) of 16 or greater and an EER (energy efficiency ratio) of at least 13. These two numbers are the best and clearest indicators of the overall energy efficiency of the product and can easily be found on the packaging for any air conditioning unit. While a 16 SEER is very good, it is not the highest rating currently available, either, so you won’t be forced to buy the most expensive model available to get your credit.

Credit Details

The tax credit is good for up to 10% of the purchase price of the unit up to $300. Keep in mind, though, that you can only claim up to $500 lifetime towards this program. So if you’ve previously claimed $250, you can only claim an additional $250 for 2011. That’s still a significant savings, though, and well worth looking into if you’re in the market for a new AC unit or system.

So if you’ve been thinking about upgrading your AC system, but haven’t quiet gotten around to, now may be the time to take advantage of this great tax credit opportunity before it’s too late.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on 2011 AC Federal Tax Credits: A Tip From Germantown

Green House Gasses and Air Conditioners

Friday, July 29th, 2011

There’s simply no way around it: the air conditioner you probably depend on all summer is emitting a constant stream of greenhouse gasses contributing to the warming of the Earth. While it’s true that the coolants used today, hydrofluorocarbons (HFCs), are much less damaging than the chlorofluorocarbons (CFCs) initially used in air conditioning, they are still harmful to the environment.

Environmentally Friendly Coolants

Recently, research has led to the development of more environmentally friendly coolants. One in particular, HFO-1234yf, is scheduled to be introduced for use in the air conditioning systems of all GM cars beginning with the 2013 models. This is a step in the right direction, but much more needs to be done to address this growing problem before it’s too late.

Electricity and Carbon Dioxide

The use of environmentally friendly coolants will only go so far towards curbing the environmental impact of air conditioning. That’s because air conditioners are universally powered by electricity, and electricity is almost universally produced by the burning of fossil fuels like coal. When coal is burned, it generates a great deal of carbon dioxide, a substantial pollutant on its own.

An Intensifying Cycle

Of course, the more carbon dioxide and other greenhouse gasses are introduced into the atmosphere, the hotter the planet will become. And as the average temperature rises, air conditioning will be used more and more to combat these effects. This is a cycle that could quickly spiral out of control if something is not done to disrupt it.

What You Can Do

There are several things you can do if you’re concerned about how your air conditioning usage impacts the environment. First of all, make the switch as quickly as possible to HFO-1234yf or a similarly environmentally-friendly coolant when it becomes available. And remember that the air conditioning in your car counts too.

You can also go a long way towards reducing your contribution to greenhouse gas emissions by keeping your overall energy consumption down. Try relying on other, natural methods of cooling your home as much as possible. And when you do turn on your air conditioner, make sure you use all of the energy being consumed as efficiently as possible.

That means keeping your unit in good shape to maintain its energy efficiency and making sure that your home is properly sealed and insulated so your air conditioner doesn’t have to work overtime maintaining a comfortable indoor temperature.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Green House Gasses and Air Conditioners

Do I Need Surge Protection for My HVAC?

Monday, July 11th, 2011

You probably know that to keep your HVAC system in good working order you need to keep up with regular maintenance. This includes things like changing air filters, cleaning out air ducts and clearing debris from both inside and outside the system. Surge protection for your system may not be something you think of immediately, but like those maintenance tasks, it’s an important part of keeping your equipment functioning properly over time.

How Surge Protection Works

Surge protection essentially shuts off your system in the event that power levels in the system rise suddenly and unacceptably. When a sudden increase in electricity occurs, any electronic device is at risk. But, unlike your stereo, your HVAC system costs thousands of dollars – no one wants to lose something so valuable to a surge that could have been prevented. That’s why a surge protector is so vital for your system.

The surge protector monitors the levels of electricity coming into your HVAC system. In the event that a surge occurs for any reason (faulty wiring, a lightning strike, etc.), the surge protector will immediately cut off power to the HVAC unit and shut all of the equipment down.

A Sizeable Investment

Your HVAC system was not an impulse buy. This is a collection of equipment that you probably spent a good deal of money on and that you rely on to keep your family comfortable throughout the year. When you look at it that way, it’s easy to see why it’s worth doing anything you can to protect your investment. Installing a surge protector is a relatively minor expense compared to the money and inconvenience it could save you by preventing serious damage to your HVAC equipment.

Proper Restart

Once a surge protector shuts off your HVAC system, you’ll need to restart it properly. The best thing to do is talk to the contractor who installs your system. They can walk you through the restart process step by step to ensure you know exactly what to do. After going through all that trouble installing a surge protector, the last thing you want is to make a mistake when turning it back on.

If you don’t already have a surge protector in place, call an HVAC professional today and learn what your system needs to be fully protected. It’s a small expense and a quick installation, so there’s no reason to put it off any longer.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Do I Need Surge Protection for My HVAC?

What Is New in Air Conditioning?

Monday, June 20th, 2011

There are developments being made in air conditioning just about every day. This is a huge business, and so manufacturers are constantly trying to outdo each other as it is their only way to compete for customers. What this means for you as a consumer is that you will always have an excellent selection of products from which to choose.

Energy efficiency is one of the main selling points for any air conditioning system. For that reason, manufacturers are constantly working to come up with new and better models. The most advanced air conditioning systems on the market have energy efficiency ratings that by far surpass what was available even ten years ago and it is only going to keep getting better.

Another type of air conditioning system that is relatively new but is rapidly gaining in popularity is the ductless mini-split system. These and other compact air conditioners are popular because they can be installed virtually anywhere and do not take up much space. They also do not require the duct system that many other central air conditioners do.

In this way, ductless mini-splits combine the best of central air conditioning and more conventional window or wall mounted units. They keep individual rooms of your house cool and comfortable and can be controlled independently of one another, but they are also very quiet and energy efficient. In fact, ductless mini-splits are among some of the most energy efficient options available in the air conditioning world today.

For many years, enjoying the comfort that air conditioning provides has meant putting up with the noise of the compressor as well. Now, however, you can get the best of both worlds. Many air conditioning companies, in response to customer requests, have been working to curtail the noise and vibrations that air conditioners make.

This has affected models all up and down the line. Whether it is a window mounted unit you are after or a large central air conditioning system, you can rest assured that the model you buy today will be much quieter and produce a great deal fewer vibrations than your old system.

This is not only good news for you. It can also help to make your relationship with your neighbors a bit friendlier. The outside component of most air conditioning systems is usually where all the noise and vibrations come from anyway, and so your neighbors are likely to hear and feel it as well.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on What Is New in Air Conditioning?