Tuckers Air Conditioning, Heating & Plumbing Blog: Posts Tagged ‘Montgomery Village’

Signs of an AC Fan Problem: A Tip from a Your Local AC Contractor

Monday, July 23rd, 2012

Air conditioners have their share of routine problems, like any other device. One set of problems that you may run into is when the fan is not working properly. To be aware of potential problems with your AC fan, look for these signs.

Sign #1: Fan is not circulating air

Clearly, a fan that is not circulating any air is a problem. If you can hear that the fan is running, or at least trying to run, but you don’t feel air circulating like it’s supposed to, that’s a sure sign of a fan problem. It could be that the fan is just worn down by use and needs to be replaced. It is trying to circulate the air, but the motor lacks the power to do so effectively.

If your AC fan is not old enough to have outlived its usefulness, you can also check for obstructions or loose screws that may be hindering performance.

Sign #2: Fan is loud

Any loud, strange, unfamiliar or generally annoying noise is a good sign that something is going on with your air conditioner. In the case of a noisy fan, it usually means there is something loose around the fan that is getting knocked or slapped around. This could be a loose part or a piece of debris. Cut the power to the air handler unit and open the cover of the fan to see if you can get a look at what is causing the noise.

If this fails to correct the problem, there could be a mechanical problem with the fan motor. Call for repairs.

Sign #3: Fan shuts off suddenly

A third common sign of AC fan problems is when the fan just shuts off suddenly, before finishing the cooling cycle. This is usually the sign of an electrical problem that is causing power to the fan to be cut before it can complete the cycle. This could be due to frayed wiring, a short in the motor or any of several other electrical causes. When this happens, have the fan motor replaced right away. This problem will only get worse with time, and an electrical issue can quickly become dangerous.

Any time you have an AC fan problem that you can’t figure out yourself pretty quickly, you should call Tuckers Air Conditioning & Heating to have it looked at, before it gives rise to bigger problems for the whole AC system. We serve Gaithersburg and the surrounding area, contact us today at 301-670-0034

Remember that we offer a 5 Year Part & Labor warranty on service repairs. Check out our Ultimate Savings Agreement to learn more!

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning | Comments Off on Signs of an AC Fan Problem: A Tip from a Your Local AC Contractor

Kensington HVAC Question: What Is Air Purification?

Wednesday, March 7th, 2012

The air around us is getting more and more polluted these days in Kensington, and people are trying to do more and more to combat it. Cars come with ratings like “ultra-low emission vehicle” and windmills generate power from moving air rather than burning coal. No doubt, these efforts help, but if you want to take an active role in improving the quality of air in your own home, consider an air purification system.

Simply put, air purification is the process of removing contaminants and pollutants from the air. There are a number of devices on the market that can purify the air in your Kensington home. While anyone can enjoy the benefits of cleaner air, they are of particular utility for people which suffer from asthma or allergies, or who live in areas with higher concentrations of outdoor air pollution.

There are three main kinds of air purifiers, categorized by the kind of technology they use:

  1. HEPA filtration
  2. Negative ion generation
  3. Electrostatic precipitation

HEPA filtration purifiers simply filter the air that passes through them using a sieve-like filter or series of filters. Depending on the efficiency of the device and the filter, some of these purifiers can trap not only solid and like particles, but also gases and odors. One advantage of this type of purifier is that the HEPA filters can last for years before they need to be changed.

Negative ion generation and electrostatic precipitation models are more complicated and technical because of the technology they use. Consult with a professional to choose which kind of technology is best for your needs, depending on the air quality problem you are experiencing. Some air purifiers can trap bacteria, viruses, fungi or chemicals, so there is bound to be one that will suit your needs.

After deciding on which type of technology you need, you will also have to choose whether you want a portable air purifier unit or a central system that covers the whole house. Obviously the former works well if you are only concerned about the air in a room or two, while the latter is better if you have chronic asthma or a more widespread air quality problem.

If you have any questions about how to improve the air quality in your house, give Tuckers Air Conditioning & Heating a call today!

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Kensington HVAC Question: What Is Air Purification?

HVAC Guide: How to Install a Programmable Thermostat

Wednesday, February 29th, 2012

Programmable thermostats are one of the best ways to save on heating costs, especially if you have a hard time remembering to turn down the heat in your Montgomery Village home. Installing a programmable thermostat will allow you to set the times you want the heat turned up or down. Not only will this make heating your home more consistent and save energy, but it will also allow you to tailor your heating needs to your schedule.

For instance, you can set the thermostat to turn on before you get up in the morning so that the house is already warm when you get out of bed, and conversely, set it to turn down after you go to bed or leave the house for work. Depending on the brand and setting options, programmable thermostats are relatively inexpensive and easy to install.

Although all styles are slightly different, here are some basic instructions that show you how easy it is to install a programmable thermostat.  Remember, this is only a general guide; always check the instructions inside the packaging of your new thermostat before you install it, or check with an electrician. Remember that Tuckers Air Conditioning & Heating has highly trained professional technicians that can help you install a new thermostat for your heating and air conditioning system.

1. Remove the Old Thermostat

Before you remove the old thermostat, check to see where it’s mounted. If it’s mounted to an electrical box, the voltage used to power the old thermostat may not be compatible with the new one. Ask a certified electrician or heating technician if you aren’t sure.

CUT THE POWER TO THE HEATING SYSTEM TO AVOID ELECTRIC SHOCK. You should always turn off the main power supply to your heating system before installing any new thermostat. If you aren’t sure how to do this, ask your Montgomery Village HVAC contractor. Once you unscrew the mounting plate for the old thermostat, just unhook the wires. Don’t throw an old mercury controlled thermostat. You should ask your local waste management facility how to properly dispose of mercury products.

2. Locate all Wires

Wrap the loose wires around a pencil to keep the wires from falling back into the wall. Identify and label each corresponding wire with a letter (do not use color coding since this is not always accurate). Strip the plastic off the ends of the wires about ¼ inch if you need to.

3. Install and Insulate Wallplate

If the area around the new wallplate is larger than the plate, insulate the hole with non-flammable insulation. Take the wallplate off the programmable thermostat and hold it against the wall to mark the screw holes with a pencil. Pull the wires through the large opening at the bottom and screw the plate to the wall.

4. Wiring

Make sure you are comfortable with wiring before you attempt to do any electrical installations. Check the manual for your programmable thermostat for instructions on wiring that specific model. In general, you’ll want to make sure you match the wire labels with the corresponding terminals on the thermostat. Sometimes there will be extra wires that aren’t needed. Always test it before completing the installation. Don’t forget the battery!

5. Install the Faceplate

Once you have it wired correctly, all you need to do is align the brackets on the faceplate with the corresponding slots on the wallplate and fasten the faceplate to the rest of the mounting. Lastly, tighten the screw at the bottom of the thermostat to hold it in place.

If you have any questions regarding programmable thermostats or this seems much too complicated for you to do on your own, give Tuckers Air Conditioning & Heating a call.

Continue Reading

Tags: , , , , , , ,
Posted in Services | Comments Off on HVAC Guide: How to Install a Programmable Thermostat

Heat Pump Tips: What Happens When You Neglect Maintenance

Monday, February 27th, 2012

Just like any HVAC system, the heat pump in your Kensington home needs routine maintenance and yearly check-ups to operate as efficiently and safely as possible. You also don’t want your heat pump to wear down to the point of a major malfunction or breakdown, which can be costly to repair or may require a complete system replacement.

Here are some things that could go wrong and cost you a lot more in the end if you don’t keep up with the regular maintenance of your heat pump.

Damage to the Compressor

The compressor in a split-system heat pump works whether you are heating or cooling your home. In the winter, the compressor reverses the flow of the refrigerant to defrost the outdoor coils, and in the summer it supplies the refrigerant to cool the home, as well as cooling the outdoor coils. Proper airflow is vital to keeping the compressor running smoothly. Filters that are not changed regularly, dirty coils, and dirty fans can all restrict airflow, which will damage the compressor. Debris around the outside components should also be cleared to allow proper airflow.

Decreased Efficiency

When dirty or broken components restrict the airflow, this damages the compressor and decreases the heat pump’s efficiency levels.  Not only is it important to clean your heat pump regularly, but you should also have it checked by a certified heating technician once a year. This will also prevent safety hazards and other hidden issues with the heat pump.

Improper Refrigerant Levels

Most heat pumps are charged with refrigerant at the factory; however, if models that are charged when they are installed are not given the right amount of refrigerant this can also affect performance levels. Refrigerant leaks and other common problems can be prevented by scheduling an annual maintenance visit with one of our qualified Kensington HVAC technicians.

Don’t wait until the heat pump in your home stops working, call Tuckers Air Conditioning & Heating to schedule your yearly check-up.

 

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Heat Pump Tips: What Happens When You Neglect Maintenance

Heating Repair Guide: Flame Sensor Problems

Monday, January 30th, 2012

A flame sensor is a very small and specific component of your Darnestown home’s furnace, but when it is malfunctioning, it can completely shut down the operation of your furnace. To start with, let’s summarize how a flame sensor works.

The flame sensor is a rod that sits directly in the path of one of the burners in your furnace. When the burner is on, the flame passes by the tip of the flame sensor, heating it up. If the furnace is on but the flame sensor is not hot, the furnace automatically switches off to avoid a continuous gas leak. So, the flame sensor is a safety measure.

Sometimes, though, the furnace can be operating just fine, and the burners are firing perfectly, the flame sensor still sends the signal that there is no flame and shuts down the furnace. This is obviously a problem.

Often, this is just a symptom of build-up on the flame sensor that is insulating it and preventing it from heating properly. We strongly recommend that you call a professional to repair it, here are the steps that they will follow:

  1. Locate the flame sensor on the furnace. It is a thin metal rod that extends through a bracket and into the path of the flame as it is expelled from one of the burners.
  2. Turn off the power to the furnace.
  3. Loosen the bracket holding the flame sensor in place and gently withdraw it.
  4. Using fine grit sandpaper or emery cloth, gently rub away any combustion build-up that has accumulated on the end of the flame sensor.
  5. Making sure all the build-up has been removed, replace the flame sensor in the bracket. Turn the furnace back on to test it.

If all went well, the furnace should remain on now, until the desired heating temperature is reached.  Most often, the problem is as simple as giving the flame sensor a good cleaning up. Since you are dealing with quite delicate equipment, you can understand why it is so important to call in a professional if suspect a problem with your flame sensor.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Heating Repair Guide: Flame Sensor Problems

Heating System Preventative Maintenance: A Guide from Montgomery Village

Monday, October 24th, 2011

Ben Franklin once said, “An ounce of prevention is worth a pound of cure.” His famous quotation can apply to many things in life, including the heating system in your Montgomery Village home. While heating systems in Ben Franklin’s time consisted of wood burning stove and fireplaces requiring little maintenance, today’s sophisticated furnaces and building controls require a good dose of preventative maintenance in order to avoid mechanical failures and inefficient operation.

For example, a furnace runs better and lasts longer when you maintain a regular schedule of filter cleaning or replacing. A dirty or clogged filter can restrict airflow from the furnace into your home’s ventilation system and cause the furnace to work harder, putting more wear and tear on it and taking months, if not years, off of its useful life. If your furnace uses disposable filters, check them every month and replace them if necessary. If your furnace uses an electronic filter that requires cleaning, check it on a monthly or semi-monthly basis and clean it with soapy water and a hose. Be aware of the change of seasons which could add extra pollutants into the air like pollens, ragweed, and cottonwood. This debris easily finds its way into the filters and creates an unhealthy indoor environment.

You can also perform a simple visual inspection of working components inside your furnace by removing the access cover and checking – with a flashlight – for loose fan belts, frayed electrical wires, or a build-up of dirt and dust. Simple solutions include tightening or replacing belts, repairing wiring, and vacuuming out dirt and dust with a hose attachment. All of these actions will keep your furnace working better and prevent future failures.

You can also do a visual check of your home’s ventilation system, paying close attention to any cracks in duct seams or holes in flex ductwork. Using sealing cement or duct tape can usually fix these problems and allow for better, unrestricted air flow. Again, these actions will help your furnace work more efficiently and avoid premature failures.

Maybe the best advice for preventing heating system breakdowns is to have a regular maintenance schedule with a local qualified heating contractor. Most contractors can set you up with annual furnace and ventilation system inspections. Having a service agreement – as a rule – gives you priority emergency repairs and discounts on parts and services. Besides that, planned maintenance is also preventative maintenance, something that will give you peace of mind in the long run.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Heating System Preventative Maintenance: A Guide from Montgomery Village

Furnace Safety Tips from Darnestown

Monday, October 17th, 2011

There are many advantages to a safely operating furnace in your Darnestown home. The most important are the safety and comfort of a home’s occupants and the cost of running the furnace. There are several things you can do to ensure the safe operation of your furnace.

Here is a checklist of ideas:

  • Clean or change furnace filters on a regular basis. Replace disposable filters and clean permanent filters using water or cleaning solutions. Your owner’s manual or a qualified heating contractor can suggest a regular maintenance schedule.
  • Check the exhaust vent from the furnace. Clear obstructions such as leaves, clothing, or animal nests from the vent pipe or chimney. Keep roof exhaust vents clear of snow. If there is a faulty exhaust system (like a blocked flue), of if there are cracks and leaks in the pipes or improper adjustment of the burner, or if there is lower air pressure indoors than outside, the furnace can create serious indoor air pollution.
  • A clear air intake is important too, since furnaces need fresh air to “breath” and complete the fuel burning cycle. Again, check for debris, snow, or animal nests in intake pipes.
  • If you have an older gas furnace, you may want to install a supplementary induced-draft fan that reduces the possibility of backdrafting. Some furnaces have automatic shutoff devices that turn off the furnace if it begins to backdraft.
  • Check internal components such as the blower motor and vacuum any dirt. Check belts and pulleys for excessive wear. You should consult your owner’s manual for any suggested maintenance tips on internal working components.
  • You may also want to check the pilot light to see if it is working and if it producing an even, blue flame. If the flame is uneven, it may be a sign of incomplete gas combustion, which can result in the creation of dangerous carbon monoxide gas.
  • Ensure that your thermostat is operating correctly by raising or lowering the temperature settings to make sure the furnace cycles on and off.
  • Install and maintain battery or hard-wired smoke and carbon monoxide detectors.

Externally vented natural gas furnaces, when properly designed and installed, will operate safely for years. But if you detect a problem, use the most common solution – contact a qualified heating professional to check out your furnace.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Furnace Safety Tips from Darnestown

Evaporative Coolers: A Tip From Laytonsville

Wednesday, August 10th, 2011

If you’re looking for an effective alternative to a traditional air conditioning system for your home in Laytonsville, an evaporative cooler is a great option to investigate. This is not new technology by any means, but evaporative coolers are rapidly gaining popularity these days for several reasons. While these aren’t the perfect solution for every home, they’re definitely worth taking a closer look at if you’re interested in cutting your cooling costs.

Here are some of the benefits of evaporative coolers:

  • Energy Efficiency – Because they cool air through evaporation, evaporative coolers use much less energy than traditional air conditioners to achieve the same results. This will take a big chunk off your energy bills each month.
  • Competitive Pricing – You can buy just about any size evaporative cooler for less than a comparably sized air conditioner. And just like air conditioners, evaporative coolers are available in a wide variety of sizes so you should have no trouble finding one to fit the space you need cooled.
  • Easy Installation – Whether you opt for a smaller window unit or a larger centralized one, evaporative coolers are at least as easy to install as air conditioners if not more so. The smaller units are made to fit into windows just like a comparably sized air conditioner, and central evaporative coolers operate through the same air ducts as your central heating system. They’re easy to integrate into your home and often less labor intensive than a central air conditioner to install.
  • Complete Air Circulation – With an air conditioner, you need to have your windows and doors sealed up tight to keep the cooled air from escaping. But because evaporative coolers work by cooling outdoor air as they bring it into your home, they require other doors and windows in the house to be open to function efficiently. As the evaporative cooler blows cooled air into the house, it pushes hotter air out, leaving you with a comfortable environment and a constant supply of fresh air.

Of course, evaporative coolers aren’t the right choice for every situation. They work extremely well in areas with hot, dry climates, but they have a harder time cooling your home when the air outside is hot and humid. They also require water to keep their cooling pads moist, and if you live in an area where drought conditions are common, it may be difficult to keep up with their water consumption.

For more information about which type of air conditioning system will work for you, please contact your local HVAC professional.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Evaporative Coolers: A Tip From Laytonsville