Tuckers Air Conditioning, Heating & Plumbing Blog: Posts Tagged ‘Olney’

Heating Guide: How to Monitor Heat Flow from Furnace Registers

Wednesday, March 14th, 2012

Of the many kinds of heating systems, forced air furnaces are among the simplest in Rockville and monitoring the flow of heat is as simple as checking the registers and feeling the flow.

The Basics of Hot Air

At the furnace, usually in the basement or a central location, air is heated to a temperature set by the thermostat.  Once large and dominant, over the years, technological improvements have enabled furnaces to be much smaller and fit into closets.

With a fan, the warm air is circulated through a system of ducts and distributed at registers or grates usually in the floor.  A second grate takes the cooler air back to the furnace to be heated.

Going With the Flow

While a forced air system tends to fluctuate between cycles, temperatures should be consistent throughout the home from room to room.  As heat is distributed, rooms get quickly warmer, then cool several degrees as heat dissipates until the thermostat setting starts the cycle over.

If there is poor circulation, the efficiency of the system is greatly reduced.  The furnace runs more often, adding strain and cost to the heating of your Rockville home.  Some rooms remain comfortable while the rise and fall of temperatures in others may be more radical or remain too cool.

Monitoring the Flow

By turning the thermostat higher, the furnace will engage and begin to force air to the registers.

Most registers have adjustable slats that can be rotated to allow more or less flow.  Checking to make sure all are fully open is the first step.  There is usually a lever or gear in obvious view.

Make sure all registers are free to allow air movement and not blocked by furniture or carpets.

After testing with your hand to see if there is adequate air flow, using an infrared or dial thermometer will more accurately identify if there are differences from register to register which could indicate a blockage of some sort in the vent or a problem with the system at the furnace.

Solutions

Furnaces should be maintained on a yearly basis by contracting with a company like Tuckers Air Conditioning & Heating who can regularly change the filters, inspect the internal elements and ensure proper and efficient functioning of this most important part of your Rockville home.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Heating Guide: How to Monitor Heat Flow from Furnace Registers

Heat Pump Tips: What Happens When You Neglect Maintenance

Monday, February 27th, 2012

Just like any HVAC system, the heat pump in your Kensington home needs routine maintenance and yearly check-ups to operate as efficiently and safely as possible. You also don’t want your heat pump to wear down to the point of a major malfunction or breakdown, which can be costly to repair or may require a complete system replacement.

Here are some things that could go wrong and cost you a lot more in the end if you don’t keep up with the regular maintenance of your heat pump.

Damage to the Compressor

The compressor in a split-system heat pump works whether you are heating or cooling your home. In the winter, the compressor reverses the flow of the refrigerant to defrost the outdoor coils, and in the summer it supplies the refrigerant to cool the home, as well as cooling the outdoor coils. Proper airflow is vital to keeping the compressor running smoothly. Filters that are not changed regularly, dirty coils, and dirty fans can all restrict airflow, which will damage the compressor. Debris around the outside components should also be cleared to allow proper airflow.

Decreased Efficiency

When dirty or broken components restrict the airflow, this damages the compressor and decreases the heat pump’s efficiency levels.  Not only is it important to clean your heat pump regularly, but you should also have it checked by a certified heating technician once a year. This will also prevent safety hazards and other hidden issues with the heat pump.

Improper Refrigerant Levels

Most heat pumps are charged with refrigerant at the factory; however, if models that are charged when they are installed are not given the right amount of refrigerant this can also affect performance levels. Refrigerant leaks and other common problems can be prevented by scheduling an annual maintenance visit with one of our qualified Kensington HVAC technicians.

Don’t wait until the heat pump in your home stops working, call Tuckers Air Conditioning & Heating to schedule your yearly check-up.

 

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Heat Pump Tips: What Happens When You Neglect Maintenance

Heating Repair Question: Why is my Air Handler Squealing?

Monday, February 6th, 2012

Unusual noises coming from your Kensington home’s HVAC system never a good thing; they make you worry that something is wrong.

It’s true that an unusual noise does often mean that something needs to be fixed; however, a noise emanating from your HVAC system does not necessarily mean a major repair. You should always have a technician check out if you suspect a problem with your system, but not all problems are going to be expensive to fix.

One common noise that homeowners notice and complain about is a squealing noise originating in the air handler. Usually, this noise is coming from the fan belt that connects the blower fan and the motor. Over time, the belt can stretch out and become worn or misaligned, which makes it slip and generate that aggravating squealing noise.

So, while the squealing can be annoying and unpleasant, a slipping belt is by no means major. A belt is an inexpensive part and a technician can install it in just a matter of minutes.

As long as the noise is a squealing and not a grinding, this simple fix wil often take care of the problem. If you hear a grinding noise, however, immediately shut the unit down and call a technician. This may mean that your motor bearings are worn out and need to be replaced ASAP before further damage is inflicted on the motor itself.

 

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Heating Repair Question: Why is my Air Handler Squealing?

New Thermostats – Are they Worth the Investment? A Question From Brinklow

Wednesday, September 21st, 2011

When you are trying to save money around your Brinklow house, a new thermostat is definitely worth looking into. Sure, your old thermostat works fine. But there are a lot of features available on newer models that can help you save money on your heating and cooling costs throughout the year.

And you do not need to wait until it is time to replace your home comfort system to upgrade your thermostat. Most thermostats can work with many different types of heating and cooling systems. So no matter what type of HVAC system you have or how old it is, you should be able to integrate some type of new thermostat into it.

But how can a new thermostat save you money? Well, they simply offer a lot of features that you can use to your advantage. For instance, even the most basic programmable thermostat can let you set different temperatures for different times of day. You can program the thermostat to turn the heat down during the day when no one is home and then you can have the heat switch back on just before you get home.

That way, you can come home to a nice, warm house without having to pay to heat it all day long when it is empty. Many newer thermostats also are more accurate and can provide more pinpoint control of your heating and cooling system. That means that you will not be wasting money because your heating system gets the actual temperature in your house up to 75°F when you only really need it to hit 72°F.

Newer thermostats help you to save money in a variety of ways, and that savings will more than pay for the cost of having a new thermostat installed. That is because thermostats are actually quite cheap and easy to install. A relatively basic programmable thermostat should not run you more than $100, and even if you opt for one of the more advanced systems out there, you will not pay more than a few hundred dollars.

That is a small price to pay considering the increased comfort possible with a state of the art thermostat and the potential for savings every month on your heating or cooling bills. Plus, you likely paid a considerable amount to have that state of the art HVAC system put in. It is worth paying just a bit more so that you can get the most possible out of it.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on New Thermostats – Are they Worth the Investment? A Question From Brinklow

AC Maintenance: Why You Cannot Neglect It in Olney

Wednesday, September 7th, 2011

Especially if you have just purchased a new air conditioning system in Olney, maintenance is probably the last thing you are thinking about. In fact, if you are like most people, you do not think about your air conditioning system at all until it does not work when you need it. But if you simply continue to use your air conditioning system without maintaining it, you will be setting yourself up for a lot of problems later on.

Just like your car or any other machine that you run on a regular basis, your air conditioning system requires a regular tune up to keep it running like it is supposed to. The type of air conditioning system you have will dictate exactly how often this maintenance service needs to take place, but most systems benefit greatly from having a tune up once a year.

When you have just purchased an air conditioning system, the last thing you probably want to do is shell out a bunch of extra cash when the system is still running fine. But it really is much cheaper to pay now rather than waiting until you have a problem with your air conditioner to call for service.

During a regular maintenance visit, your technician will examine all of the component parts of your air conditioning system to make sure that they are working the way they should and not showing any signs of excess wear and tear. This is a great way to detect problems early, even when they have not yet begun to show in the air conditioner’s performance.

Your air conditioning technician will also thoroughly clean out your system to ensure that no excess debris is allowed to build up around the coil or other vital parts of the air conditioner. This is important because it helps the air conditioner to continue to function at peak energy efficiency levels. Without regular maintenance, your air conditioner will gradually lose efficiency over time. It will only lose a little bit every year, but if you do not do something to stop it, those little bits will quickly add up.

Regular maintenance also helps to prevent more costly and inconvenient repair visits later on. And it will certainly help to increase the lifespan of your air conditioner as well. Whether you have just purchased an air conditioning system or have had yours for several years, it is never too late to start your annual maintenance visits.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on AC Maintenance: Why You Cannot Neglect It in Olney

How Do I Find the Right Size Unit for My Room?

Friday, July 15th, 2011

When buying an air conditioner, there are a lot of things you need to take into account. One of the most important is the size and power of the unit you choose. Air conditioners come in many different sizes, so if you really want to get the most out of your purchase, you need to do your research and pick one that fits your home like a glove.

Square Feet and BTUs

The best way to determine how large of an air conditioner you need is to match the number of BTUs the unit has to the square footage of the room you want to use it in. That means you need to know what room you’re buying it for before you make your purchase.

The number of BTUs needed goes up proportionately with the room size, so even if you don’t have exact measurements or if your room is oddly shaped, you can get a good idea of how large an air conditioner you need. For instance, a 400 to 550 square foot room is best served by an air conditioner with between 8,000 and 11,000 BTUs, while a room that’s only 250 square feet would probably be fine with a 6,000 BTU unit.

Bigger Isn’t Always Better

One of the most common mistakes people make when buying an air conditioner is to assume that the bigger the unit the better it will work. The truth is that buying an air conditioner that’s too big for your room is just as much of a waste as buying one that’s too small.

A larger air conditioner will cost more, and it will probably make the room too cold. It will also cycle on and off more frequently than a properly sized unit and it won’t be able to properly control the humidity level, leaving you with a cold, damp environment. That’s not very comfortable.

Other Factors

The square footage is definitely the most important piece of data you’ll need before buying a new air conditioner for any room in your house. But don’t forget to take some other factors into account as well. For instance, if the room has particularly high ceilings or receives a lot of direct sunlight, you’ll probably need a slightly more powerful unit than the straight square footage would indicate.

If you’re not sure how certain features of your home will impact your buying decision, call a professional who can help you get a more exact idea of what it will take to stay cool.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on How Do I Find the Right Size Unit for My Room?

How Do I Check for a Dirty Evaporator Coil?

Friday, July 8th, 2011

The evaporator coil is an essential piece of your air conditioning system. It absorbs heat from air that passes over it, and that air then travels into your home to cool it. So if your coil is dirty or isn’t functioning properly, the cooling power of your air conditioning system is diminished. Fortunately, this problem is fixed easily by cleaning the evaporator coil. You can do this on your own or have a professional come in to take care of it.

Signs of a Dirty Evaporator Coil

The most obvious sign of a dirty evaporator coil is an overall drop in system pressure. As long as you know what constitutes a normal pressure for your system, you should be able to tell if the current pressure is below that level. If it is, a dirty evaporator coil is probably your culprit. You can also check the static pressure in your system to see if that is low, but this requires specialized equipment.

Even if you don’t notice any particular signs that your air conditioning system isn’t working properly, it’s a good idea to clean your evaporator coils once a year or so. This can help prevent any larger problems from developing in the future.

Finding Your Coil

Probably the hardest part of cleaning an evaporator coil is reaching it. Unlike your condenser coil, which is located in your outdoor condenser unit, the evaporator coil is found inside near the air handler or furnace. If you have the owner’s manual, there should be detailed instructions telling you where the coil is and how to safely access it.

Alternately, you can have an HVAC technician show you what to do the next time they come out to work on your system. Whatever you do, though, make sure that power to your AC unit is completely shut off before you start working on it. Once you’ve gained access to the coil, use a brush or vacuum attachment to remove any debris or sediment you find there.

The Importance of Maintenance

Cleaning your evaporator coil is only one part of the regular maintenance required to keep your air conditioning system in good working order for the foreseeable future. There are plenty of things you can do on your own, but it pays to have a professional come out once a year or so to check out the entire system and make any necessary repairs.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on How Do I Check for a Dirty Evaporator Coil?

Can I Choose Environmentally Friendly Coolants?

Friday, July 1st, 2011

Air conditioners are indispensable in many parts of the country, but their environmental impact has long been a source of controversy. In particular, the coolants that were used in the earliest air conditioners, chlorofluorocarbons (CFCs) have done quite a bit of damage to the Earth’s protective ozone layer.

When this affect was discovered, countries all over the world acted to have them phased out of production and use in air conditioning. While CFCs have not been produced since 1995, there are still many air conditioning units functioning today that use CFCs. As these units wear out, of course, the CFCs will gradually disappear from use altogether.

Another type of coolant that is commonly used in air conditioners is hydrochlorofluorocarbons (HCFCs). These have a slightly lower environmental impact than their cousin CFCs, but they are still not ideal in terms of preserving the ozone layer and impeding the progress of global warming. HCFCs are gradually being phased out as well, and they will no longer be produced at all by 2030.

However, it is still possible to buy air conditioners that use HCFCs as a coolant, and if you can avoid this, you should. HCFCs are not nearly as environmentally friendly as some of the other options on the market, and if you are concerned about the effect that these types of chemicals can have on our environment, it is best to steer clear of air conditioners that use HCFCs.

So what coolants are considered environmentally friendly? Well, there are actually two options in this regard. The first are hydroflourocarbons (HFCs). Although they are quite similar to CFCs and HCFCs, HFCs do not contain chlorine and so do not do the type of damage that their predecessors were capable of. You can find air conditioners that use HFCs relatively easily by looking for an “ozone friendly” label on the box.

Refrigerant blends are also becoming a more and more popular environmentally friendly coolant solution for air conditioners as well. Although these types of coolants typically cost more to produce and so can drive up the cost of the air conditioners that use them, they should begin to come down in price as they are more widely adopted across the industry. Just as with HFCs, look for the “ozone friendly” label to identify air conditioners that use refrigerant blends as coolants.

Continue Reading

Tags: , , ,
Posted in Services, Uncategorized | Comments Off on Can I Choose Environmentally Friendly Coolants?